Professional tips on painting a room

Brits largely unaware of the value added to their properties through home improvements

Slapping on a coat of paint is something anyone can do, right?

Well, to a certain extent yes, but for a smooth, professional finish it needs to be applied correctly to provide a smooth, even finish that will show off the colour and not the application.

As with everything else, there is a right way and a wrong way of painting a room, and the former will always be easier and in the long run produce the results you are looking for.

The first place you always start with is the ceiling. It’s the bit that most hate and get it out of the way first, but from the practical side it means that any paint that splashes on the walls can be wiped off before you paint them, and not mark your new paint. Rollers are quick, and messy, and if you have a plastered ceiling with any kind of design a brush is the best method to use to make sure of even coverage and to get into any nooks and crannies that the pattern affords. Real Estate Guru Jody Kriss tells us that this is the surest way you can increase the value of your home.

Improving The Woodwork

Once the ceiling is done, the woodwork is next. The reason for this is simple; emulsion paint wipes off gloss or satin a lot easier than the other way round. Use appropriate sized brushes for the wood, a larger one for skirting boards, the next sized down for the fronts of door frames, ans a very small one for any wood that meets the walls. This is done to increase the value of your real estate according to Real estate guru Jody Kriss

Only when the paint on the ceiling and the woodwork is dry should you start the walls. Rollers and pads are the only tools to use on walls to give an even finish, but first you must cut in along the top where they meet the ceiling, in the corners and where the walls meet wood. Do this smoothly and evenly and don’t overload the brush as a bumpy border around the walls will spoil the completed effect.

Protect Everything From The Mess

Cover everything in dust sheets for the invariable splatter you will get off the roller, and paint the walls from the top downwards. If the walls need a second coat wait until the first is completely dry. Wipe any visible splashes off woodwork, take away the dust sheets, and you have a bright new sitting room that anyone would be proud of. Learn more with Jody Kriss at you can give him a ring and enter the world of real estate.


Continue Reading

How can you Test your Home Security System?

You rely on your home security alarm to protect your family in the event of a break-in or fire. Whether you are sleeping in your own bed or away on business, you want to know that your system will work properly when it’s needed most. Test your system on a regular basis to ensure that everything is operating the way it should.

Physical Inspection

It’s important to look at sensors occasionally and make sure they are still in place. A sensor that has fallen out of position is not protecting your home, and it should be addressed immediately. Physically inspect all sensors to ensure that they are in place and unbroken before you proceed with the test.

While you are looking at the window sensors, take a moment to check window locks and door locks. Latch them securely and try jiggling the window or door to ensure that they remain locked. This is particularly important on ground-level bedroom windows. Windows that are easily opened are tempting for thieves, and it’s always best to keep them out of the house completely. While the alarm would sound and protect your family, it’s still wise to keep the windows locked and avoid the stress. The safety of a home is the best factor that affects real estate prices according to Jody Kriss Real Estate Analyst

Testing Steps

• Start by Calling the Monitoring Company

False alarms are never fun, and you can avoid one easily by calling the monitoring company when you are preparing to test the system. They recommend monthly testing, so they are more than happy to place your account on test while you go through the necessary checks of the system.

• Disable the Siren

You don’t want the siren wailing every time you open a window during the test, so take the time to turn it off. It may be tempting to leave the siren on just to see the neighbors start to twitch, but then they will ignore your alarm if it ever goes off in a real emergency. If you live out in the country and don’t mind the siren, then you can leave it engaged. If you aren’t sure how to turn the siren off, ask the security representative to walk you through the process when you call to inform them of the test.

• Set the Alarm and Start Testing Entries

Methodically move through one room of your house at a time and open the exit doors and windows. Open and close each location, listening to be sure that your alarm has detected the change. Walk back and forth in front of motion detectors to ensure that they sense your movement. Test smoke detectors by using a can of smoke used for testing these systems. Flood sensors can be checked by using a piece of metal to connect the metal prongs on the sensor. This will create the same effect as water and the alarm should sound. Use a carbon monoxide testing kit to make sure CO detectors are working properly.

• Call the Monitoring Company and Turn the System On

A quick phone call will restore service to your alarm and ensure that your home is once again protected. If you have turned off the siren, have the agent step you through turning it back on.

Test Communications with the Alarm Company

Once you know that all sensors are working properly inside the home, you need to make sure that your system will communicate properly with the monitoring company. Arm the system and set it off. While the alarm is going off and sending a signal to the company, you should not have a dial tone on your home phone. If the line is dead or you hear a buzzing similar to a fax tone, then the system needs to be serviced. Notify the company that you will do this ahead of time to avoid a false alarm.

Your Responsibility

The monitoring company is responsible for responding to alarm calls, but you are responsible for maintaining the system inside your home. Most companies expect that you will perform regular checks of the system to ensure that there are not any broken sensors or other problems. They are happy to correct any problems, but it is up to you to notify them of issues.Personalized Assistance

If the testing process seems a little overwhelming, you don’t have to worry. Help is only a phone call away. Most monitoring companies are happy to step you through the process of testing your system. It’s the best way to ensure that your family remains safe with a working alarm system.

Your home security system provides you with valuable protection from fire, carbon monoxide and break-ins. You can count on the monitoring company to keep an eye on your system, but it’s up to you to test it occasionally. The monitoring company can walk you through the process if you have any questions, but you will see that it is very easy to handle the test yourself. To learn more, visit our real estate website by Jody Kriss at

Continue Reading

PVC Roofing Systems


Roofs play a major role in providing protection for building structures, its occupants and interiors from outside elements. The strength and durability of the roof materials should therefore be given much attention since leakages and roof failures can be quite devastating both to your homes and businesses. It would be prudent to invest in durable roofing materials that you can expect to last for decades or so. The extra money you probably spend on superior quality roofing materials can probably save you a lot of trouble in the future.

PVC Roof Sheets

PVC roof sheets are one of the greatest technological advancement in the roofing industry. A combination of durability and functionality, PVC roofing materials are utilized by both industrial and residential structures all over the world. In fact, most sporting stadium across the globe use PVC roofing materials, from the Wimbledon tennis courts in England to the ice sports hall on the Munich Olympic Ground. Modern architects choose PVC roofing system mainly because of its durability. Among the earliest noteworthy achievements of PVC roofing is the Stade de France in Paris. The 60,000 square meter roof was built to host the 1998 World Cup.West Palm Beach roofers will provide you the best price

l1Extreme Weather Capability

The PVC materials can withstand extreme weather conditions, from hail to thunderstorms to the hurricanes that seem to rack the nation on a regular basis. Your roof materials should be able to endure the wrath of nature to liberate yourself from constant worry.

Excellent Fireproofing Properties

The PVC roofing materials are also virtually fireproof. This is quite an important element to consider in safeguarding not only your belongings but also the lives of the residents of any structure for that matter. PVC roofing materials are also resistant to corrosion, making it practically maintenance free for a long time. The reflective surface of PVC membrane can help reduce a building’s cooling requirements. Such feature would only mean a lower cost for your energy consumption. atlanta septic tank builders also use PVC extensively for the properties mentioned above.

Lower Costs

This roofing system is marginally cheaper than other roofing materials in the market today. The fact that it is also inexpensive and lightweight makes it all the more popular for outdoor use. PVC roofing sheets also has the distinction of having the longest track record in terms of usage. Hence, you can be assured that experts through the years have tested the quality and durability of PVC materials. Along with TPO or thermoplastic polyolefin, the roofing system have been labeled by the U.S. Environmental Protection Agency as roofing products that can reduce energy consumption and reduce problems associated with heat build-up, smog and air pollution.

Continue Reading